Metering

Electricity and gas meters


Standard Electricity & Gas Meters and Readings

There are a number of different types of electricity and gas meters. Some are digital meters and others show the reading using old school dials.

On electricity meters the numbers on a meter represent kilowatt hours (or kWh) of electricity used. Kilowatt hours are often referred to as “units”.

On gas meters, the numbers represent the volume of gas used measured in cubic meters (or m³). We then convert this to kilowatt hours for billing.


Digital Meter

This looks very much like the odometer in a car.

Read the numbers from left to right, ignoring any number that is either coloured red or looks distinctly different to the majority. These different numbers record the tenths or hundredths of a unit, are not used for billing purposes and can only be read by Jedi Knights.


Smart Electricity and Gas Meters and Readings

These very clever meters communicate directly with our billing system so that we don’t need to send a meter reader to your house. You’ll get an accurate bill each month and we can also take automatic readings if you move properties.

You shouldn’t ever need to read the meter yourself, but if that’s what pushes your buttons then here’s how to do it.

Electricity Meter

  • Your Smart Meter's screen will automatically change its display every eight seconds. To stop the screen changing, just press the ‘SELECT' button.
  • Your meter reading will appear on the screen.

Test pattern

Test pattern: This can be ignored. It's just the meter doing a display check.
 

Meter reading

Your meter reading(s): Depending on your meter, you could see 24hr, CTRL, NITE, DAY, some figures and kWh. The figures are how much electricity has been used in this billing cycle.
 

Each plan

Other meter reading(s): The meter reading for each plan will appear one after the other for properties with more than one price plan.
 

Current load

Current load: How much electricity is being used (in kilowatts) right now.
 

Signal strength

Signal strength: This figure shows how strong the signal is to wirelessly send us the usage data.
 

Date

Date: This displays the current date.
 

Time

Time: This shows the current time.
 
Disconnected

Disconnected
Disconnected: This will be displayed if the electricity to the meter or property has been disconnected. Usually we'd let you know beforehand unless we need to disconnect the electricity for safety reasons.
 
 

Gas Meter

Press and hold the button above “OK” for 4 seconds, the LCD screen will turn on and the reading will be displayed.


Enter a meter reading

Enter your reading online here, or call us on 0800 086 400.